System
The System page has two cards: System info and System network.
Settings are saved automatically
Every setting you change in the web app is saved on the unit's SD card half a second later, and comes back at the next power-on. There is no Save button to remember.
System info
| Row | What it does |
|---|---|
| Identity | Serial number, edition, firmware version and hardware version of the unit. Copy info copies them, for a support request. |
| Update firmware | Opens the firmware update page. |
| Display name | The unit's name, shown in Discovery, on the dashboard and in the browser tab. |
| Identify | Flashes the unit's three LEDs for 5 seconds, to find it in a rack (LED indicators). |
| SD Card | The SD card that keeps the settings: the space used out of its capacity, and its file system, for example 48.0 KB / 3.6 GB ยท FAT32. Hover the line for the free space and more information. No card when the slot is empty, Mount failed when a card is there but cannot be read. The figures are read at power-on and after each save. |
| Config | The saved settings, see below. |
Config
The Config row has two status dots and four buttons:
| Icon | Name | What it does |
|---|---|---|
| Left dot | Green: a saved configuration exists on the SD card. Grey: there is none. | |
| Right dot | Green: the saved configuration is loaded. Grey: it is not. | |
| Download | Saves the unit's settings to your computer as config.json: a backup, or a setup to copy to another unit. |
|
| Upload | Replaces the unit's settings with a config.json from your computer, at once. The file's network settings (address, DHCP) are stored too and take effect at the next power-on. |
|
| Save | Saves the current settings to the SD card now (they are saved automatically anyway). | |
| Delete | Removes the saved settings from the SD card. Undo in the message that follows puts them back. After a delete, the unit starts with its factory settings at the next power-on. |
To copy a setup to another unit, download the config.json of the first and upload it to the second: the network settings come with it, so after its next power-on the second unit has the first one's address. Give it its own address with Discovery (First connection) before both are on the network together.
System network
Click Edit to change:
- DHCP on or off. With DHCP on, the IP, subnet and gateway below are the fallback the unit uses when no DHCP server answers within 10 s (Network).
- IP
- Subnet
- Gateway
The Discovery tool can change them too (First connection), without the web app.


