Kuper firmware
Standard + the Kuper input, on RigFX Standard: up to 16 axes from Kuper motion control or a Ravensclaw Talon or Nano remote head, over the network. The zoom and focus axes can drive the lens.
Sources
| Source | Pose3D | FIZ | Lens | 1D motion |
|---|---|---|---|---|
| Lens FIZ (sync card) | ✓ | |||
| FreeD (3 inputs) | ✓ | ✓ | ||
| OpenTrackIO | ✓ | ✓ | ✓ | |
| Canon CV | ✓ | |||
| Kuper (Kuper, Talon, Nano, up to 16 axes) | ✓ | ✓ |
Rig presets
| Preset | What it is | Tutorial |
|---|---|---|
| Tripod + Nano head | A Ravensclaw Nano head on a tripod | — |
| Tripod + FR7 | A Sony FR7 on a tripod. Offered on every firmware | — |
| Slider + FR7 | A Sony FR7 on a slider between two tripods. Offered on every firmware | — |
No tutorial for this firmware yet: Get started walks through the setup.