Skip to content

Overview

There are two hardware editions: RigFX Standard and RigFX Cartoni. Each has two connector panels: the network and power panel (with the status LEDs) and the lens panel. Sizes and weights are in Specifications.

RigFX Standard
RigFX Standard
Lens, Focus and Zoom inputs, sync, Ethernet
RigFX Cartoni
RigFX Cartoni
the same, plus 4 Cartoni encoder inputs

The Cartoni firmware is the only one that needs its own hardware edition: Cartoni heads and cranes plug their encoders straight into RigFX Cartoni. Every other firmware (Filmotechnic, Kuper, OptiTrack) receives its tracking over Ethernet, so it runs on RigFX Standard like the Standard firmware. To change edition, flash another firmware.

The RigFX Standard hardware runs the Standard, Filmotechnic, Kuper and OptiTrack firmware, whose trackers come over Ethernet. The RigFX Cartoni hardware has the same connectors plus 4 Cartoni encoder inputs and runs the Cartoni firmware.

See Editions to pick one.

RigFX Standard

Standard, Filmotechnic, Kuper and OptiTrack firmware.

Network and power panel

Network and power panel of RigFX Standard: 1 Network (RJ45), 2 Ref (BNC), 3 Timecode (BNC), 4 Power (XLR 4-pin), and the LEDs A Power (red), B Ref and C Timecode (green).

Lens panel

Lens panel of RigFX Standard: 5 micro USB debug port, 6 Zoom and 7 Focus (Lemo 6-pin), 8 Lens and 9 Debug port 2 (Hirose 12-pin).

Connectors

# Label Type Purpose Detailed on
1 Network RJ45 Ethernet, locking Neutrik Tracking output, web app, Discovery Network
2 Ref BNC Black Burst or Tri-Level Genlock7 input Genlock / Sync
3 Timecode BNC LTC9 timecode input Genlock / Sync
4 Power XLR 4-pin (12 V) Main power input Power
5 Debug port 1 micro USB Firmware update Firmware update
6 Zoom Lemo 6-pin External encoder 1, for Zoom by default (any ring, set on the source card) Lens FIZ source
7 Focus Lemo 6-pin External encoder 2, for Focus by default (any ring, set on the source card) Lens FIZ source
8 Lens Hirose 12-pin Servo-encoded FIZ lenses (Canon, Fujinon, Angénieux), follow focus systems (cMotion, Preston), or smart lenses /i1 (Cooke, Zeiss, Fujinon) Lens FIZ source
9 Debug port 2 Hirose 12-pin Diagnostic port for hardware —

The three status LEDs (A Power, B Ref, C Timecode) and their patterns are on the LED indicators page.

RigFX Cartoni

Cartoni firmware. The same connectors as RigFX Standard, with the differences in amber.

Network and power panel

Network and power panel of RigFX Cartoni: the same connectors and LEDs as RigFX Standard, with 9b Debug port 2 on the side of the unit.

Lens panel

Lens panel of RigFX Cartoni: 6 Zoom, 7 Focus, 8 Lens, and 10 the four Cartoni encoder inputs (Lemo 7-pin), numbered 1 to 4.

Differences from RigFX Standard

# Label Type Purpose Detailed on
9b Debug port 2 Hirose 12-pin Moved to the side of the unit —
10 Cartoni encoders 1–4 4 × Lemo 7-pin Cartoni encoded heads and cranes, one axis each Cartoni firmware