Skip to content

Specifications

12 V DC XLR 4-pin, 0.3 A minimum
< 5 s boot time
0.45 kg RigFX Standard, without cheeseplate

The two hardware editions

RigFX Standard
RigFX Standard
Standard, Filmotechnic, Kuper, OptiTrack
RigFX Cartoni
RigFX Cartoni
Cartoni
RigFX Standard RigFX Cartoni
Dimensions, without cheeseplate 120 × 90 × 50 mm 120 × 105 × 50 mm
Weight, without cheeseplate 0.45 kg 0.55 kg
Power 12 V DC, XLR 4-pin, 0.3 A minimum same
Network RJ45 Ethernet, locking Neutrik, 100 Mbit/s same
Genlock7 Black Burst, Tri-Level, BNC same
Timecode SMPTE-12M LTC9, BNC same
Lens inputs Hirose 12-pin (servo lens: Canon, Fujinon, Angénieux; follow focus: cMotion, Preston; /i1: Cooke, Zeiss, Fujinon), Lemo 6-pin Zoom and Focus encoders same
Encoder inputs — 4 × Lemo 7-pin, Cartoni encoders
Status LEDs Power, Ref, Timecode same
Firmware update micro USB same
Firmware Standard, Filmotechnic, Kuper, OptiTrack Cartoni

Connectors in detail: Hardware overview. Which firmware to run: Editions.

Dimensions

The housings in top, front and end view, in millimetres, measured on the CAD. The connectors, the cheeseplate and the V-lock are not drawn.

RigFX Standard

RigFX Standard in top, front and end view. The housing is 120 mm wide, 90 mm deep and 50 mm high. The lens panel is on the left end, the network and power panel on the right.

RigFX Cartoni

RigFX Cartoni in top, front and end view. The housing is 120 mm wide, 105 mm deep and 50 mm high. The network and power panel end is 15 mm shallower than the lens panel end, over 61 mm.

Mounting

A cheeseplate and a male V-lock mount the unit on any camera or rig.

Computer

  • Any computer on the same network as the unit, with a current web browser, runs the web app.
  • Windows 10 / 11, x64 (Intel or AMD) for the RigFX Network Discovery and RigFX Firmware Updater tools, a single .exe each, no installer.